Filter
Top Products
Function of the KDC-X869/KDC-MP922
Selecting the display font color.
1 Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "DISP" is displayed above the
[3] button.
Refer to <Notes on Multi-function Key System> (page 8).
2 Enter display control mode
Press the [3] ("DISP") button.
3 Switch the Font color
Press the [4] ("CLR") button.
Repeatedly press the button, nine kinds of Font colors are shown
in turn.
4 Exit display control mode
Press the [RTN] button.
Font Color Select
— 23 —
Switching the information displayed in Standby.
1 Enter Standby
Press the [SRC] button.
Select the "ALL OFF" display.
The setting of this function is available while "Display Type A" is
selected for the Display mode.
2 Enter display control mode
Press the [3] ("DISP") button.
3 Enter text select mode
Press the [3] ("TEXT") button.
4 Switch the display
Press the [4] or [¢] button.
Each time the button is pressed the display switches.
KDC-X969
Information Display
Standby display & Clock "ALL OFF" & "CLOCK"
Standby display "ALL OFF"
Date & Clock "DATE" & "CLOCK"
KDC-X869/MP922
Information Display
Date & Clock "DATE" & "CLOCK"
Standby display "ALL OFF"
KDC-X869/MP922: While "Display Type C" is selected for the Display
mode the date is only displayed.
5 Exit Display Control mode
Press the [RTN] button.
Switching the Standby Display
KDC-X969_U.S_r4.pg 02.12.13 4:44 PM Page 23