Kenwood KDC-MP922 Stereo Receiver User Manual


 
Doing Track/File Search by entering the track/file number.
1 Enter the track/file number
Press the number buttons on the remote.
2 Do Track/File Search
Press the [4] or [¢] button.
Canceling Direct Track/File Search
Press the [38] button.
Direct Track/File Search (Function of remote)
(Direct File Search: Function of MP3/WMA)
Selecting the disc set in the Disc changer or the folder recorded
on the MP3/WMA media.
Press the [FM] or [AM] button.
Disc/ Folder Search
(Disc Search: Function of disc changer)
(Folder Search: Function of MP3/WMA)
Searching for a song on the disc or in the MP3/WMA folder.
Press the [4] or [¢] button.
Track/File Search
Reversing
Hold down on the [4] button.
Release your finger to play the disc at that point.
Fast Forwarding
Hold down on the [¢] button.
Release your finger to play the disc at that point.
Fast Forwarding and Reversing
Playing discs set in the optional accessory disc player connected
to this unit.
Press the [SRC] button.
Select the display for the disc player you want.
Display examples:
Display Disc player
"CD2" CD player
"DISC CH"/"DISC" CD changer/ MD changer
Pause and play
Press the [38] button.
Each time the button is pressed it pauses and plays.
The functions that can be used and the information that can be
displayed will differ depending on the external disc players being
connected.
Playing External Disc
The MP3/WMA media that this unit can play are CD-ROM, CD-R,
and CD-RW.
The medium formats must be ISO 9660 Level 1, Level 2, Joliet, or
Romeo. The methods and precautions to be followed for writing
MP3/WMA data are covered in <Notes on playing MP3/WMA>
(page 6). Check that section before creating your MP3/WMA media.
— 33 —
KDC-X969_U.S_r4.pg 02.12.13 4:44 PM Page 33