Kenwood KDC-MP922 Stereo Receiver User Manual


 
The back panel is a precision piece of equipment and can be
damaged by shocks or jolts. For that reason, keep the back panel
in its special storage case while detached.
Do not expose the Backpanel or its storage case to direct sunlight
or excessive heat or humidity. Also avoid places with too much
dust or the possibility of water splashing.
Reattaching the Backpanel
1 Set the Backpanel to the panel bracket.
2 Hold down on the Backpanel until it is locked.
The Backpanel of the unit can be detached and taken with you,
helping to deter theft.
Removing the Backpanel
1 Turn the ignition OFF or press the [SRC] button for at least 1
second.
Turn OFF the power, and the control panel becomes horizontal.
After the set time passes in <OFF Wait Time Setting> (page 43), the
panel is closed.
2 Remove the Backpanel forward.
When <DSI (Disabled System Indicator)> (page 42) is set to ON,
DSI blinks.
Theft Deterrent Panel
• "AUX"/"AUX1"
• "TV"
• "VIDEO"
• "GAME"
• "PORTABLE"
• "DVD"
4 Exit Auxiliary input display setting mode
Press the [NAME.S] button.
When operation stops for 10 seconds, the name at that time is
selected, and Auxiliary input display setting mode closes.
— 25 —
KDC-X969_U.S_r4.pg 02.12.13 4:44 PM Page 25