Filter
Top Products
1 Select the source for adjustment
Press the [SRC] button.
Audio Control
Fine-tuning so that the System Q value is optimal when setting
the speaker type.
1 Enter Standby
Press the [SRC] button.
Select the "ALL OFF" display.
2 Enter Speaker Setting mode
Press the [Q] button.
"Speaker Setting" is displayed.
3 Select the Speaker type
Press the [2] — [5] button.
Each time the button is pressed the setting switches as shown
below.
Speaker type Button Display
OFF [2] "OFF"
For 5 & 4 in. speaker [3] "5/4inch"
For 6 & 6x9 in. speaker [4] "6*9/6inch"
For the OEM speaker [5] "O.E.M."
4 Exit Speaker Setting mode
Press the [Q] button.
Speaker Setting
When it’s ON, "Non Fader ON" is displayed.
Turning the Non-fading output ON or OFF.
Press the [NF] button for at least 1 second.
Each time the button is pressed Non-fading output switches ON
or OFF.
Non-fading Output
You can recall the best sound setting preset for different types of
music.
1 Select the source to set
Press the [SRC] button.
2 Select the Sound type
Press the [Q] button.
Each time the button is pressed the sound setting switches.
Sound setting Display
SRS WOW "SRS WOW"
Flat "FLAT"
User memory "User Preset"
Rock "ROCK"
Pops "POPS"
Easy "EASY"
Top 40 "TOP40"
Jazz "JAZZ"
• User memory: The values set on the <Audio control> (page 12).
• Each setting value is changed with the <Speaker setting> (page
12).
First, select the speaker type with the Speaker setting.
• When <Dual Zone System> (page 26) is set to ON, the setting of
SRS WOW is disabled.
System Q
General features
— 12 —
English
KDC-X969_U.S_r4.pg 02.12.13 4:44 PM Page 12