Kenwood KDC-MP922 Stereo Receiver User Manual


 
ANT CONT
ILLUMI
EXT.
CONT.
P.CONT
FRONT L
FRONT R
REAR L
REAR R
+
FRONT
REAR AUX IN
NON
FADING
English
— 50 —
FM/AM antenna input 15
Fuse (10A) 27
Wiring harness
(Accessory1)22
Ignition wire (Red) 46
Battery wire (Yellow)
Ground wire (Black) - (To car chassis) 48
Ignition key
switch 41
Car fuse
box
(Main fuse)
42
ACC 44
Car fuse box 45
Battery
43
If no connections are made, do not let the wire come out from the tab. 3a
Power control wire (Blue/White)
Motor antenna control wire (Blue)
Dimmer control wire (Orange / White)
4 When using the optional power amplifier,
connect to its power control terminal.
7 To car light control switch
5 Depending on what antenna you are using,
connect either to the control terminal of the
motor antenna, or to the power terminal for
the booster amplifier of the film-type antenna.
External amplifier control wire
(Pink / Black) (KDC-X969/X869 only)
8 To "EXT.AMP.CONT." terminal of the amplifier
having the external amp control function.
To KENWOOD disc changer/
Sirius satellite radio tuner/
External optional accessory
To connect these leads,
refer to the relevant
instruction manuals.
Connecting Wires to Terminals
Rear left output (White) 10
Rear right output (Red) 11
14 Front left output (White)
13 Front right output (Red)
12 Non-fading right output (Red)
49 Non-fading left output (White)
AUX left input (White)
AUX right input (Red)
28
White/Black
31
Gray/Black
34
Green/Black
37
Purple/Black
White
30
Gray
33
Green
36
Purple
39
To front left
speaker 29
To front right
speaker 32
To rear right
speaker 38
To rear left
speaker 35
KDC-X969_U.S_r4.pg 02.12.13 4:45 PM Page 50