Filter
Top Products
61
After pressing DVD or DVD MULTI,
these buttons can be used for the
DVD menu operations.
Note:
For detailed menu operations, refer to the instructions supplied
with the discs or the DVD player.
To change the transmittable signals for
operating another manufacturer’s DVD player
1. Press and hold DVD POWER.
2. Press DVD.
3. Enter a manufacturer’s code
using buttons 1–9, and 0.
See page 62 to find the code.
4. Release DVD POWER.
5. Try to operate your DVD
player by pressing
DVD POWER.
When your DVD player turns on or off,
you have entered the correct code.
If more than one code is listed for
your brand of DVD player, try each
one until the correct one is entered.
The following button can be used for
operating the DVD player:
DVD POWER : Turn on and off the
DVD player.
After pressing DVD or DVD MULTI,
you can perform the following
operations on the DVD player:
PLAY : Start playing.
4 : Return to the beginning of the current (or
previous) chapter. Some model of the DVD
player, rewind the picture.
¢ : Skip to the beginning of the next chapter.
Some model of the DVD player, fast-forward
the picture.
STOP : Stop playing.
PAUSE : Pause playing. To resume, press PLAY.
1 – 10, 0, +10 : Select a track number directly.
For track number 5, press 5.
For track number 15, press +10, then 5.
For track number 20, press +10, then 10
(or press +10, +10, then 0).
For track number 30, press +10, +10, then 10
(or press +10, +10, +10, then 0).
Notes:
• Refer to the manual supplied for the DVD player.
• Some buttons listed above may not be used for some DVD
players.
ENTER
TOP
MENU
MENU
DVD
DVD
RETURN
ENTER
TOP
MENU
MENU
STOP PAUSE
FF/
/ REW
PLAY
123
456
7
/P 89
10
+
100
POWER
To change the transmittable signals for
operating another manufacturer’s CD player
1. Press and hold
AUDIO POWER ON.
2. Press CD.
3. Enter a manufacturer’s code
using buttons 1–9, and 0.
See page 62 to find the code.
4. Release AUDIO POWER ON.
5. Try to operate your CD player
by pressing one of the below
buttons.
When your CD player operated
correctly, you have entered the correct
code.
• DO NOT forget to turn on the CD
player before pressing one of the
below buttons.
If more than one code is listed for
your brand of CD player, try each one
until the correct one is entered.
After pressing CD, you can perform the
following operations on the CD player:
PLAY : Start playing.
4 : Return to the beginning of the current (or
previous) track.
¢ : Skip to the beginning of the next track.
STOP : Stop playing.
PAUSE : Pause playing. To resume, press PLAY.
1 – 10, +10 : Select a track number directly.
For track number 5, press 5.
For track number 15, press +10, then 5.
For track number 20, press +10, then 10.
For track number 30, press +10, +10, then 10.
Notes:
• Refer to the manual supplied for your CD player.
• Some buttons listed above may not be used for some CD
players.
AUDIO POWER
CD
STOP PAUSE
FF/
/ REW
PLAY
123
456
7
/P 89
10
+
100
ON