Filter
Top Products
35
English
LINEAR PCM
DIGITAL
L
SUBWFR
LS RS
CR
DIGITAL
AUTO
VOLUME
DSP
SPEAKERS 1
All channel stereo mode
This mode can reproduce a larger stereo sound field using all the
connected (and activated) speakers.
• If the surround speakers are set to “NONE,” you cannot select
“ALL STEREO.”
Mono Film
In order to reproduce a more acoustic sound field in your listening
room while viewing monaural sound video software (analog, 2-
channel digital, and Dual Mono signals), you can use this mode.
The surround effect will be added, and the sound localization of
actor’s words will be improved. This mode cannot be used for
multi-channel digital signals.
When “MONO FILM” is used, the sounds come out of all the
connected and activated speakers.
• If surround speakers are set to “NONE” in the speaker setting,
JVC’s original 3D-PHONIC processing (which has been
developed to create the surround effect through the front speakers
only) is used. The 3D-PHONIC indicator lights up on the display.
• If incoming signals change from 2-channel digital signal to
another digital signal type, “MONO FILM” is canceled and an
appropriate Surround mode is activated.
Activating the DSP Modes
Activating one of the DSP modes for a source automatically
recalls the memorized settings and adjustments (see pages 21 to
29).
You can also use the buttons on the remote control for the same
functions.
1. Select and play any source excluding DVD
MULTI.
2. Press DSP repeatedly until the DSP mode you
want appears on the display.
• Each time you press the button, the DSP modes change as
follows:
=
HALL 1 =
HALL 2 =
LIVE CLUB
=
DANCE CLUB =
PAVILION =
ALL STEREO*
1
= THEATER 1 =
THEATER 2 =
MONO FILM*
2
=
(Back to the beginning)
*
1
When the surround speakers are set to “NONE,” you cannot
select “ALL STEREO.”
*
2
When multi-channel signals come in, you cannot select
“MONO FILM.”
Note:
When the surround speakers are set to “NONE,” the 3D-PHONIC
processing is applied to the DSP modes (the 3D-PHONIC indicator
also lights up).
To adjust the effect level (except All Channel Stereo), see page
29.
To cancel the DSP modes
Press SURROUND/DSP OFF (or SURR/DSP OFF on the remote
control) repeatedly until “SURR OFF” appears on the display.
Sound reproduced from normal stereo
Sound reproduced from All Channel Stereo mode
30-36_7040[C] 04.2.12, 19:0135