Filter
Top Products
34
English
: Suitable for audio sources
: Suitable for video sources
Using the DSP Modes
This unit activates a variety of DSP modes automatically. The basic settings and adjustments stored (see pages 21 to
29) are applied automatically.
Early reflections
Reflections from
behind
Direct sounds
Reproducing the Sound Field
The sound heard in a concert hall, club, etc. consists of direct sound
and indirect sound—early reflections and reflections from behind.
Direct sounds reach the listener directly without any reflection. On
the other hand, indirect sounds are delayed by the distances of the
ceiling and walls. These direct sounds and indirect sounds are the
most important elements of the acoustic surround effects.
DSP modes can create these important elements, and give you a real
“being there” feeling.
Introducing the DSP Modes
DSP modes include the following modes—
• Digital Acoustic Processor (DAP) modes (HALL 1, HALL 2,
LIVE CLUB, DANCE CLUB, PAVILION, THEATER 1,
THEATER 2)
• ALL STEREO
• MONO FILM—Used for all types of 2-channel signals (including
Dual Mono signal)
To use DSP modes, press DSP so that the DSP modes change as
follows.
The DSP indicator also lights up on the display.
=
HALL 1 =
HALL 2 =
LIVE CLUB
=
DANCE CLUB =
PAVILION =
ALL STEREO
= THEATER 1 =
THEATER 2 =
MONO FILM
=
(Back to the beginning)
Digital Acoustic Processor (DAP) modes
You can use the following DAP modes in order to reproduce a more
acoustic sound field in your listening room.
HALL 1 Reproduces the spatial feeling of a large
shoebox-shaped hall designed primarily for
classical concerts. (Its seating capacity is about
2000.)
HALL 2 Reproduces the spatial feeling of a large
vineyard-shaped hall designed primarily for
classical concerts. (Its seating capacity is about
2000.)
LIVE CLUB Reproduces the spatial feeling of a live music
club with a low ceiling.
DANCE CLUB Reproduces the spatial feeling of a rocking
dance club.
PAVILION Reproduces the spatial feeling of an exhibition
hall with a high ceiling.
THEATER 1* Reproduces the spatial feeling of a large theater
where the seating capacity is about 600.
THEATER 2* Reproduces the spatial feeling of a small
theater where the seating capacity is about 300.
*
The built-in Dolby Pro Logic II decoder is activated when playing
back 2-channel analog or digital source. The
indicator lights up.
When using the DAP mode, the sounds come out of all the
connected and activated speakers.
• If the surround speakers are set to “NONE” in the speaker
setting, JVC’s original 3D-PHONIC processing (which has been
developed to create the surround effect through the front speakers
only) is used.
The 3D-PHONIC indicator lights up on the display.
3D Headphone mode
You can also enjoy the DSP mode (except All Channel Stereo
mode) through the headphones.
If you press DSP when the front speakers 1 and 2 are both
deactivated, 3D Headphone mode (3D H PHONE) is activated
without respect to the type of software played back.
“3D H PHONE” appears on the display and the DSP and
HEADPHONE indicators also light up.
30-36_7040[C] 04.2.12, 19:0134