Filter
Top Products
43
To change the transmittable signals for
operating another manufacturer’s DVD player
1. Press and hold DVD .
2 Press DVD.
3. Enter a manufacturer’s code using buttons 1 – 9,
and 0.
See the list on page 44 to find the code.
4. Release DVD .
5. Try to operate your DVD player by pressing
DVD
.
When your DVD player turns on or off, you have entered the
correct code.
If there are more than one code listed for your brand of
DVD, try each one until the correct one is entered.
The following button can be used for operating the DVD:
DVD
: Turn on and off the DVD.
After pressing DVD or DVD MULTI, you can perform the
following operations on the DVD player:
3: Start playing.
4: Return to the beginning of the current (or
previous) chapter. Some model of the DVD
player, rewind the picture
¢: Skip to the beginning of the next chapter. Some
model of the DVD player, fast-forward the
picture.
7: Stop playing.
8: Pause playing. To resume, press 3.
1 – 10, 0, +10: Select a track number directly.
For track number 5, press 5.
For track number 15, press +10, then 5.
For track number 20, press +10, then 10
(or press +10, +10, then 0).
For track number 30, press +10, +10, then 10
(or press +10, +10, +10, then 0).
After pressing DVD or DVD MULTI,
these buttons can be used for the
DVD menu operations.
Note:
For detailed menu operations, refer to the instructions supplied
with the discs or the DVD player.
To change the transmittable signals for
operating another manufacturer’s VCR
1. Press and hold VCR .
2. Press VCR.
3. Enter manufacturer’s code using buttons 1 – 9,
and 0.
See the list on page 44 to find the code.
4. Release VCR .
5. Try to operate your VCR by pressing VCR
.
When your VCR turns on or off, you have entered the correct
code.
If there are more than one code listed for your brand of
VCR, try each one until the correct one is entered.
The following button can be used for operating the VCR:
VCR
: Turn on and off the VCR.
After pressing VCR, you can perform the following operations
on the VCR:
CHANNEL +/–: Change the TV channels on the VCR.
1 – 9,10 (RETURN), 0, 100+ (+10):
Select the TV channels on a VCR.
The 10 (RETURN) button will function as the
ENTER button if your VCR requires pressing
ENTER after selecting a channel number.
3: Start playback.
REW: Rewind the tape.
FF: Fast-forward the tape.
7: Stop playing or recording.
8: Pause playing. To resume, press 3.
REC PAUSE: Enter recording pause.
To start recording, press this button then 3.
DVD MENU
38-46_7040[J] 04.1.21, 15:5543