Filter
Top Products
13
English
Basic Operations
The following operations are commonly used when you play any sound sources.
Operations hereafter will be explained using the buttons on the front panel.
You can also use the buttons on the remote control for the same functions if they have the same and similar names/marks.
Selecting the Source to Play
Press one of the source selection buttons.
• When you have connected digital source components using the
digital terminals, change the input mode for these components to
the digital input mode (see page 15).
Notes:
• When connecting a CD recorder (to the TAPE/CDR jacks) and a
DBS tuner (to the TV SOUND/DBS jacks), change the source
names shown on the display. For details, see page 17.
• When you press CD, TAPE/CDR, or FM/AM button on the remote
control, the receiver automatically turns on.
• When you select “DVD MULTI,” you can enjoy analog discrete
output sound (5.1-channel surround reproduction) from the external
component.
– You may need to select analog discrete output mode on the
external component.
– When using the headphones, you can listen to the front channel
sounds (left and right) only.
– The Surround modes (see page 30) cannot be applied to DVD
MULTI playback mode.
Daily Operational Procedure
1. Turn on the power.
• See “Turning On the Power” below.
2. Select the source.
• See “Selecting the Source to Play” to the right.
3. Adjust the volume.
• See “Adjusting the Volume” on page 14.
4. Select the Surround or DSP modes.
• See “Activating the Surround Modes” (page 33) and
“Activating the DSP Modes” (page 35).
Turning On the Power
Press STANDBY/ON (or AUDIO on the remote
control).
The STANDBY lamp goes off.
Current source name and Surround/DSP mode appear.
Current volume level appears.
To turn off the power (into standby mode),
press
STANDBY/ON (or AUDIO on the remote control)
again.
The STANDBY lamp lights up.
Note:
A small amount of power is consumed in standby mode. To turn off
the power completely, unplug the AC power cord.
On the front panel
On the remote
TV SOUND/DBSVCR
DVDDVD MULTI AMFMTAPE/CDRCD
LINEAR PCM
L
R
ANALOG
VOLUME
SPEAKERS 1
LINEAR PCM
L
R
ANALOG
VOLUME
SPEAKERS 1
DVD MULTI
DVD CD TAPE/CDR
FM/AM
VCR
TV/DBS
Selected source name and current
Surround/DSP mode appear.
1
2
4
3
13-18_7040[C] 04.2.12, 19:0113