Filter
Top Products
– 35 –
English
Setting the Screen Messages
During disc operation, it is recommended to set this function
to “ON” so that you can confirm what you are doing on the
TV screen.
To go back to the previous screen during the procedure,
press RETURN.
1
Press SETUP.
Setup menu appears on the TV screen.
2
Press Cursor ∞ (or 5) to select (highlight)
“7 DISPLAY OPTIONS,” then press
ENTER.
Display Options menu appears. (“1 TV ASPECT” must
be selected – highlighted.)
3
Press Cursor ∞ (or 5) to select (highlight)
“4 SCREEN MESSAGE,” then press
ENTER.
4
Press Cursor ∞ (or 5) to select (highlight) a
desired setting, then press ENTER.
• 1 ON: Select this to show the on-screen indications on
the TV screen.
• 2 OFF: Select this not to show the on-screen
indications.
To erase the Setup menu, press RETURN repeatedly
until the Setup menu disappears.
DISPLAY OPTIONS
ENTER
RETURN
1 TV ASPECT
2 ANGLE MARK
3 STILL MODE
4 SCREEN MESSAGE
5 BLACK LEVEL
4:3 PS
ON
AUTO
ON
OFF
SCREEN MESSAGES
ENTER
RETURN
1 ON
2 OFF
Setting the Brightness
Using this function, you can change the brightness of the on-
screen display.
To go back to the previous screen during the procedure,
press RETURN.
1
Press SETUP.
Setup menu appears on the TV screen.
2
Press Cursor ∞ (or 5) to select (highlight)
“7 DISPLAY OPTIONS,” then press
ENTER.
Display Options menu appears. (“1 TV ASPECT” must
be selected – highlighted.)
3
Press Cursor ∞ (or 5) to select (highlight)
“5 BLACK LEVEL,” then press ENTER.
4
Press Cursor ∞ (or 5) to select (highlight) a
desired setting, then press ENTER.
• 1 ON: Select this to darken the on-screen display.
• 2 OFF: Select this to brighten the on-screen display.
To erase the Setup menu, press RETURN repeatedly
until the Setup menu disappears.
DISPLAY OPTIONS
ENTER
RETURN
1 TV ASPECT
2 ANGLE MARK
3 STILL MODE
4 SCREEN MESSAGE
5 BLACK LEVEL
4:3 PS
ON
AUTO
ON
ON
BLACK LEVEL
ENTER
RETURN
1 ON
2 OFF
EN28-35.CA-MXDVA5[UG]_f 01.3.23, 1:45 PM35