Filter
Top Products
– 12 –
English
Selecting the Sound Modes
This function only affects the playback sound, but does not
affect your recording.
You can select one of the 6 preset sound modes (3 surround
modes and 3 SEA — Sound Effect Amplifier — modes).
To select the sound modes, turn the
SOUND MODE control until the sound
mode you want appears on the display.
• As you turn the control, the sound modes change as
follows:
SOUND
MODE
Surround modes*:
D.CLUB: Increases resonance and bass.
HALL: Adds depth and brilliance to the sound.
STADIUM: Adds clarity and spreads the sound, like in an
outdoor stadium.
SEA (Sound Effect Amplifier) modes:
ROCK: Boosts low and high frequency. Good for
acoustic music.
POP: Good for vocal music.
CLASSIC: Good for classical music.
OFF: Cancels the sound mode.
* Surround elements are added to the SEA elements to create a
being-there feeling in your room.
When one of these modes is selected, the SOUND MODE
indicator lights up as —
While one of the SEA modes (SEA elements without surround
elements) is selected, the SOUND MODE indicator lights up as
—
When using the remote control, press SOUND MODE to
adjust the sound mode.
• Each time you press the button, the sound modes change as
follows:
D.CLUB
(Dance CLUB)
OFF
(Canceled)
HALL STADIUM ROCK
POP
CLASSIC
SOUND MODE indicator
also lights up on the display
D.CLUB
(Dance CLUB)
OFF
(Canceled)
HALL STADIUM ROCK
POP
CLASSIC
Creating a Being-There Feeling
By adding breadth and depth the reproduced sounds, this
function (3D Sound) can create a being-there feeling while
playing back software encoded with Dolby Digital or with
MPEG Audio.
• When the Digital Output setting is set to Bitstream on the
Setup Menu (see page 31), this function does not work.
On the remote control ONLY:
1
Press 3D SOUND during play.
The current 3D Sound setting appears on the
TV screen.
• If “3-D SOUND : ON” appears on the TV screen, now
3D Sound function is in use, press 3D SOUND again to
erase the indication.
2
Press Cursor 3 (or 2) to
turn on 3D Sound function.
3
Press 3D SOUND again to erase the
indication.
To turn off 3D Sound, repeat the above
procedure and in step 2, select “OFF.”
Setting the AM Tuner Interval Spacing
Some countries space AM stations 9 kHz apart, and some
countries use 10 kHz spacing.
On the unit ONLY:
When shipped, the unit is set to 10 kHz spacing.
To select 9 kHz, press while holding down 1 when the
unit is in standby mode. “AM -- 9” appears on the display.
To change back to 10 kHz interval, press while holding
down ¡ when the unit is in standby mode. “AM -- 10”
appears on the display.
STANDBY/ON
STANDBY
+
+
TUNING
STANDBY/ON
STANDBY
TUNING
3-D SOUND : ON
3-D SOUND : OFF
EN01-13.CA-MXDVA5[UG]_f 01.3.23, 1:42 PM12