Filter
Top Products
– 34 –
English
Setting the Angle Mark
When playing a DVD containing multi-angle views, you can
show the angle mark on the upper right corner of the TV screen.
To go back to the previous screen during the procedure,
press RETURN.
1
Press SETUP.
Setup menu appears on the TV screen.
2
Press Cursor ∞ (or 5) to select (highlight)
“7 DISPLAY OPTIONS,” then press
ENTER.
Display Options menu appears. (“1 TV ASPECT” must
be selected – highlighted.)
3
Press Cursor ∞ (or 5) to select (highlight)
“2 ANGLE MARK,” then press ENTER.
4
Press Cursor ∞ (or 5) to select (highlight) a
desired setting, then press ENTER.
• 1 ON: Select this to display the angle mark.
• 2 OFF: Select this not to display the angle mark.
To erase the Setup menu, press RETURN repeatedly
until the Setup menu disappears.
Setting the Still Picture Quality
If the picture shakes or small letters cannot be shown clearly
during still picture playback, set the still picture mode.
To go back to the previous screen during the procedure,
press RETURN.
1
Press SETUP.
Setup menu appears on the TV screen.
2
Press Cursor ∞ (or 5) to select (highlight)
“7 DISPLAY OPTIONS,” then press
ENTER.
Display Options menu appears. (“1 TV ASPECT” must
be selected – highlighted.)
3
Press Cursor ∞ (or 5) to select (highlight)
“3 STILL MODE,” then press ENTER.
4
Press Cursor ∞ (or 5) to select (highlight) a
desired setting, then press ENTER.
• 1 FIELD: Select this if the picture shakes with
“3 AUTO” selected.
• 2 FRAME: Select this if small letters cannot be clearly
shown with “3 AUTO” selected.
• 3 AUTO: Normally select this.
To erase the Setup menu, press RETURN repeatedly
until the Setup menu disappears.
DISPLAY OPTIONS
ENTER
RETURN
1 TV ASPECT
2 ANGLE MARK
3 STILL MODE
4 SCREEN MESSAGE
5 BLACK LEVEL
4:3 PS
ON
AUTO
ON
OFF
ANGLE MARK
ENTER
RETURN
1 ON
2 OFF
DISPLAY OPTIONS
ENTER
RETURN
1 TV ASPECT
2 ANGLE MARK
3 STILL MODE
4 SCREEN MESSAGE
5 BLACK LEVEL
4:3 PS
ON
AUTO
ON
OFF
STILL MODE
ENTER
RETURN
1 FIELD
2 FRAME
3 AUTO
Continued
EN28-35.CA-MXDVA5[UG]_f 01.3.23, 1:45 PM34