Filter
Top Products
17
english
Jabra GO 6470 USER MANUAL
Note: If you dock a Jabra GO base and headset that are not paired, the touchscreen asks if you would like
to pair the two units removing the previously paired headset (if any) from the base’s pairing table).
4.4 CONNECTING THE Jabra GO BASE TO YOUR DESK PHONE
Identifying Your Desk Phone Features
The way you connect and congure the Jabra GO base will vary according to the type of desk phone you are
using. Check your phone (by looking at its connectors and/or documentation) to see which of the following
features it has, then see the appropriate section below to learn how to connect your base to the phone:
- Standard desk phone
This type of phone does not include any built-in support for adding a headset. You will therefore connect
the Jabra GO base between your desk phone’s handset and body, enabling you to use either the handset or
headset. All desk phones can be connected in this way.
- Desk phone with headset port
This type of phone provides a dedicated headset port (usually at the back of the phone). These phones
typically also have a button on the front panel for switching between the headset and handset. This type of
phone might also have an electronic hookswitch (see below).
- Desk phone with electronic hookswitch
This type of phone is able to place or answer a call automatically when you press the multifunction button on
your headset. This requires a desk phone that includes an electronic hookswitch feature and also requires an
extra adapter cable from Jabra. Please see our web site and/or refer to your telephone’s user manual for details
about electronic hookswitch compatibility.
- Desk phone with GN1000 Remote Handset Lifter
A handset lifter physically lifts your handset from your desk phone when needed, thereby creating a solution
that works similarly to an electronic hookswitch. The GN1000 Remote Handset Lifter is available separately;
please speak to your Jabra dealer for details.