Filter
Top Products
59
Listening to the Radio
—Continued
■
Direct Tuning
You can select a SIRIUS Satellite Radio channel directly
by entering its number.
Notes:
• If you select an unavailable channel, “INVALID
CHANNEL” appears on the display.
• If you select a channel that you are not subscribed to,
“CALL SIRIUS” appears on the display.
• Channels that are locked must be unlocked before you
can listen to them. See “Parental Lock” on page 60 for
more information.
Selecting Channels on the AV receiver:
Selecting the Previous Channel:
Presetting SIRIUS Channels
You can store a combination of up to 40 of your favorite
SIRIUS Satellite Radio channels and AM/FM radio sta-
tions as presets.
1
Press the [Receiver] Remote
Mode button, followed by the
[D.TUN] button.
The [Receiver] button flashes.
2
Within 8 seconds, use the num-
ber buttons to enter the channel
number.
For example, to select channel #20,
press 0, 2, 0, or 2, 0, [Enter].
Note:
• While the [Receiver] button is flash-
ing, you cannot select another input
source with the remote controller.
1
Press the [Tuning Mode] button
repeatedly to select Channel
Search mode or Category Search
mode.
2
Press [Enter] repeatedly to select
a category.
Return
Tuning , Preset
Memory
Tuning Mode
Enter
3
Use the Tuning Up and Down
[ ]/[ ] buttons to select a chan-
nel.
In Channel Search mode, you can
select any channel.
In Category Search mode, you can only
select channels from the currently
selected category.
To listen to the previously
selected SIRIUS Satellite Radio
channel, press the [Return] but-
ton.
1
Tune into the SIRIUS channel that
you want to store as a preset.
2
Press the [Memory] button.
The preset number flashes.
3
While the preset number is flash-
ing (about 8 seconds), use the
Preset [ ]/[ ] buttons to select
a preset from 1 through 40.
4
Press the [Memory] button again
to store the channel.
The channel is stored and the preset
number stops flashing.
Repeat this procedure for all of your
favorite SIRIUS Satellite Radio chan-
nels.
Remote
controller
AV receiver