Filter
Top Products
Chapter 2: WEB Configuration
Illustrations contained in this document are for representation only.
62
Set the period of beacon transmissions to allow mobile stations to locate and identify a BSS. The
measure unit is “time units” (TU) of 1024 microseconds. (Value range: 1~65535)
DTIM Interval:
The value you set here is used to inform mobile stations when multicast frames that have been
buffered at the Wireless Voice Gateway will be delivered and how often that delivery occurs. (Value
range: 1~255)
Fragmentation Threshold:
Set the number of the fragmenting frames to make the data to be delivered without errors induced by
the interference. Frames longer than the value you set here are fragmented before the initial
transmission into fragments no longer than the value of the threshold. (Value range: 256~ 2346)
RTS Threshold:
Set the value for sending a request to the destination. All the frames of a length greater than the
threshold that you set here will be sent with the four-way frame exchange. And, a length less than or
equal to the value that you set will not be proceeded by RTS. (Value range: 0~ 2347)
54g
TM
Network Mode:
There are three modes for you to choose, please check the specification of your wireless card
and
choose
a proper setting.
54g
TM
Protection:
Select Auto to turn on the 54g
TM
protection; select Off to turn down the protection.
Xpress
TM
Technology:
When Xpress is turned on, aggregate throughput (the sum of the individual throughput speeds of each
client on the network) can improve by up to 27% in 802.11g-only networks, and up to 75% in mixed
networks comprised of 802.11g and 802.11b standard equipment.
Rate:
It decides the speed of data transmission. There are several rates provided here for you to choose.
Choose any one of it according to your needs by using the drop-down menu.
Output Power:
To reduce the output power.