Filter
Top Products
Chapter 1: Connections and Setup
Illustrations contained in this document are for representation only.
8
Wall Mounting
Wall MountingWall Mounting
Wall Mounting
This article will show the user through the process of wall-mounting the Wireless Gateway
The Adapter has two wall-mount slots on its back panel.
Two screws are needed to mount the Adapter.
To do this:
1. Ensure that the wall you use is smooth, flat, dry and sturdy and use the 2 screw holes which are
101.6 mm apart from each other.
2. Fix the screws into wall, leaving their heads 3 mm (0.12 inch) clear of the wall surface.
3. Remove any connections to the unit and locate it over the screw heads. When in line, gently