Filter
Top Products
Chapter 2: WEB Configuration
Illustrations contained in this document are for representation only.
59
Fig. 38
If you select WPS Method to PIN then it will ask for PIN while configuring the WiFi AP by showing a
text box so, you need to enter PIN to establish
the connection. You can get the PIN from your connected
Wi-Fi client.
Fig. 39
PIN: Use this option to set the PIN, enter 4-8 digits PIN of the device you wish to configure. After
entering the pin click “Add” button, then the WPS Setup AP page will appear as shown in Fig.38
Fig. 40
And WPS Configure Status will be “In progress”, after establishing the connection the WPS Configure
Status will be “Success!” as shown below. After successful connection the client will get IP address from
AP and then internet will be accessible.