Filter
Top Products
Manual Fusion Intelpage IP
© CommtechWireless Page 33
Serial Port Settings
• Baud - The transmission speed of the RS232 port on the Intelpage IP 5. (default
9600)
• Data bits - The number of bits that actually contain information pertaining to the
message rather than to the transmission (e.g. stop bits). (default 8)
• Parity - A method of verifying the accuracy of the data sent. In this case it is either
none (not used), odd or even. (default NONE)
• Stop bits - The number of bits sent at the end of each byte and is used for
synchronization purposes. In this case it is either 1 or 2. (default 1)
• Flow Control - This refers to the “flow control” property of the connection.
Æ IMPORTANT: Baud, data bits, parity and stop bits must all match that of the
system’s port that the Intelpage IP 5 is connected to on the other end.