Filter
Top Products
Fusion Intelpage IP Manual
Page 16 © CommtechWireless
Network Settings
From the Main Menu, select [3] to enter the network settings screen.
• Hostname - The hostname is a unique name that identifies a device on the network.
• DHCP Enabled – Dynamic Host Configuration Protocol. If this service exists on
your network it can provide the device an IP address, mask and gateway
automatically. Some DHCP servers allow the reservation of an IP address for a
specified MAC address. If DHCP is not used (box unchecked), the IP address, mask
and gateway have to be manually configured. Please consult your IT administrator for
these settings. (default Off)
• IP Address - The IP Address of the Intelpage IP 5 unit. (default 192.168.0.100)
• Mask - The network mask of the network you are connected to. (default
255.255.255.0)
• Gateway - If the device is to be accessed from the internet or another network, the
gateway is the route used to reach the external network. (default 192.168.0.1)
NOTE: The IP address, mask and gateway fields will display the current settings.
If DHCP is enabled, any changes to the fields will not be saved as they are server
assigned.
• MAC - This is the Intelpage IP 5’s unique hardware number on the network. The
Media Access Control address is factory set and should not need to be changed.
▲ WARNING: Care should be taken if altering the MAC address, as it can result in
the unit no longer being addressable.