Filter
Top Products
Fusion Intelpage IP Manual
Page 24 © CommtechWireless
Transmitter
From the Main Menu, select [A] to enter the transmitter screen. This screen is used to
configure the transmitter
• Frequency Band – After the Intelpage IP unit has read the data from the internal
transmitter, it will display the band of the radio inside. This will either be 148-
174MHz or 440-470MHz
• Frequency – Here you can type the frequency required for the site. For example if
your pagers are operating on 450.325MHz, then you would type in 450325000.
• Power – Press the [SPACE BAR] to toggle between Low, Medium or High power
levels. These values typically correspond to power output levels of 500mW, 2W and
5W respectively.
• Channel Spacing - This field refers to the space between adjacent channels. In the
majority of applications, 25kHz should be selected here (for ±4.5kHz FSK). If you are
using pagers capable of narrow band (±2.5kHz FSK) you can select 12.5kHz in this
field.