Chapter 4 Rack and Optional Product Installation
4.3 Standard Installation Rules Before Shipment (Only for Regions Other than EMEA&I)
ETERNUS DX60 S2 Disk storage system User’s Guide -Site Planning-
60
Copyright 2012 FUJITSU LIMITED P3AM-5492-04ENZ0
Figure 4.4 Disk installation example at shipment (2.5" type controller enclosure)
■ 3.5" type controller enclosure
When a drive enclosure is added, up to twenty-four 3.5" disks can be installed.
When optional disks are purchased at the same time as the ETERNUS DX Disk storage system,
the ETERNUS DX Disk storage system is shipped from the factory with the disks installed in the
enclosures.
The following diagram shows an example of the installation order for optional disks.
Figure 4.5 Disk installation example at shipment (3.5" type controller enclosure)
2.5" SAS (300GB, RAID1)
2.5" SAS (300GB, RAID1+0)
2.5" SAS (450GB, RAID1)
2.5" SAS (600GB, RAID6)
2.5" SAS (600GB, hot spare)
A:
B:
C:
D:
H1:
Optional disks
CE#0
BBBBBBCCDDDDDDAA H1
H1 C C
CC
DE#1
AAAA
B
CE#0
AABB
BBB
CH2
C
3.5" SAS (450GB, RAID1+0)
3.5" SAS (600GB, RAID1+0)
3.5" SAS (600GB, hot spare)
3.5" Nearline SAS (2TB, RAID5)
3.5" Nearline SAS (2TB, hot spare)
A:
B:
H1:
C:
H2:
Optional disks