Filter
Top Products
Chapter 3 Connections
3.2 LAN Connection
ETERNUS DX60 S2 Disk storage system User’s Guide -Site Planning-
45
Copyright 2012 FUJITSU LIMITED P3AM-5492-04ENZ0
3.2 LAN Connection
The ETERNUS DX Disk storage system requires a LAN connection for operation management.
In addition, information such as ETERNUS DX Disk storage system failures is notified to the
remote support center.
Figure 3.5 Example of a LAN connection
When using ETERNUS Web GUI to manage operations, prepare a Web browser in the
administration terminal. The following table shows the supported Web browsers.
Table 3.2 ETERNUS Web GUI operating environment
When using ETERNUS Web GUI to connect the ETERNUS DX Disk storage system, the default
port number is 80 for http or 443 for https.
■ LAN for operation management
In an ETERNUS DX Disk storage system, the system administrator logs on to the ETERNUS DX
Disk storage system via a LAN to set the RAID configuration, manage operations, and perform
maintenance. The computer for operation management that is used for accessing the ETERNUS
DX Disk storage system via ETERNUS Web GUI or ETERNUS CLI is called an administration
terminal.
In addition, the functions that are provided by the management/monitoring server on the LAN can
be used. These functions include SNMP (device monitoring), SMTP (e-mail sending), and NTP
(time correction).
Make sure to connect each controller to the LAN for operation
management.
Software Guaranteed operating environment
Web browser Microsoft Internet Explorer 6.0, 7.0, 8.0
Mozilla Firefox 3.0.x, 3.5.x, 3.6.x
SNMP
manager
NTP server
Mail server
Remote support
center
Administration
terminal
ETERNUS DX
Disk storage system