Filter
Top Products
ETERNUS DX60 S2 Disk storage system User’s Guide -Site Planning-
4
Copyright 2012 FUJITSU LIMITED P3AM-5492-04ENZ0
About this Manual
Organization
This document is composed of the following four chapters:
● Chapter 1 Hardware Configurations
This chapter describes the main components and the relative optional products that are
installed in the ETERNUS DX60 S2 Disk storage system.
● Chapter 2 ETERNUS DX Disk Storage System Installation
This chapter describes the installation specifications, the installation environment, and the
power requirements.
● Chapter 3 Connections
This chapter describes the configuration for each interface to connect to the ETERNUS DX60
S2 Disk storage system.
● Chapter 4 Rack and Optional Product Installation
This chapter describes the requirements for rack installation.
This chapter also describes the standard installation rules (installation locations and installa-
tion order) of the optional products before shipment from the factory when the optional prod-
ucts are purchased with the ETERNUS DX60 S2 Disk storage system at the same time.
Naming Conventions
■ Abbreviations used in this manual
• "ETERNUS DX Disk storage system" refers to the ETERNUS DX60 S2 Disk storage system.
• "Host Bus Adapter (HBA)" refers to the interface module normally used by the server to
connect to the ETERNUS DX Disk storage systems.
A "FC card", "LAN card", "Network Interface Card (NIC)", or "SAS card" may be used instead,
depending on the server and interface.
• Trademark symbols such as ™ and ® are omitted in this document.