Filter
Top Products
Chapter 1 Hardware Configurations
1.1 Controller Enclosure
ETERNUS DX60 S2 Disk storage system User’s Guide -Site Planning-
16
Copyright 2012 FUJITSU LIMITED P3AM-5492-04ENZ0
■ Host interface ports
Host interface ports are used to connect controllers to servers.
Two host interface ports can be installed in the controller of an ETERNUS DX Disk storage sys-
tem.
FC, iSCSI, and SAS are available as host interface.
● FC model
Figure 1.12 Host interface port (FC model)
● iSCSI model
Figure 1.13 Host interface port (iSCSI model)
● SAS model
Figure 1.14 Host interface port (SAS model)
The following table shows the host interface port specifications.
Table 1.1 Host interface port specifications
Interface Transfer speed (max.) Connector type
Number of ports for
each controller
FC 4Gbit/s SFP 2
iSCSI 1Gbit/s RJ-45 2
SAS 3Gbit/s miniSAS (SFF8088) 2
FC ports (0 (Left), 1 (Right))
iSCSI ports (0 (Left), 1 (Right))
SAS ports (0 (Left), 1 (Right))