Filter
Top Products
ETERNUS DX60 S2 Disk storage system User’s Guide -Site Planning-
26
Copyright 2012 FUJITSU LIMITED P3AM-5492-04ENZ0
Chapter 2 ETERNUS DX Disk Storage System
Installation
This chapter explains the installation of the ETERNUS DX Disk storage system.
2.1 Installation Specifications
2.1.1 ETERNUS DX60 S2
The following table shows the specifications of the ETERNUS DX60 S2.
Table 2.1 ETERNUS DX60 S2 installation specifications
Item
ETERNUS DX60 S2
2.5" disk configuration 3.5" disk configuration
Dimensions
(W × D × H)
Controller enclosure
483 × 650 × 88mm
(2U)
483 × 650 × 88mm
(2U)
Drive enclosure —
483 × 650 × 88mm
(2U)
Power
distribution
unit
1U 435 × 148 × 38mm
2U (485 × 280 × 43mm) × 2 (*1)
Maximum
weight (*2)
Controller enclosure 35kg
Drive enclosure 35kg
Power
distribution
unit
1U 2kg
2U (6kg) × 2 (*1)
Service area Front: 800mm, Rear: 800mm
Power
Voltage AC 100 – 120V, AC 200 – 240V
Phase Single
Frequency 50Hz/60Hz
Number of power supply units 2 (for each enclosure)
Plug type
EMEA&I region
For AC200V connections:
IEC60320-C14G (supplied as standard)
Regions other
than EMEA&I
For AC200V connections:
NEMA L6-15P (supplied as standard)
For AC100V/AC200V connections:
IEC60320-C14 (optional)