Filter
Top Products
DSP presets
53
The G68 Digital Surround Controller allows you to modify any of
the built-in presets, and save them for future use.
You can either save the changes to the built-in preset, or you can
create up to 10 presets of your own, with names of your choice, so
you can use them alongside the built-in presets.
To save the preset settings
•Make sure the menus are unlocked; see
To run the Configuration
Wizard,
page 25.
•Press DSP to select the preset you want to modify.
•Change the preset parameters to the values you want to store.
•Press More then Store, or Function + Store on the MSR+.
The display shows the next available user-defined preset. For
example:
Store öõú óòô
Pick Preset
to overwrite
User 1
•If you want to overwrite an existing user-defined preset press A
to select the preset you want to overwrite.
For example:
Store öõú óòô
Pick Preset
to overwrite
Classical
Alternatively press V to choose the built-in preset you started
with. For example:
Store öõú óòô
Pick Preset
to overwrite
Trifield
•Press Store.
The settings have been stored in the new or existing preset you
selected.
If you are defining a user preset you can now edit the name of the
preset if you wish.
A flashing cursor shows the letter you are editing:
ìî ïñ óòô Store öõú
Write label
for preset
User 1
•Press > or < to select the character position you want to edit.
•Press A or V to change the character.
Each press steps through the sequence A to Z, a to z, 0 to 9, full
stop, and blank. You can also select a blank directly by pressing
Clear on the MSR+.
Defining your own presets
G Series DSP 53 31/10/03, 4:24:43 pm