Meridian Audio G68 Stereo Receiver User Manual


 
Installing the
digital surround
controller
9
To connect to a source with analogue multichannel outputs (eg SACD or DVD-A player)
SACD/DVD-A player
6xPHONO LEADS
S-VIDEO LEAD
DIGITAL LEADS
G68 Digital Surround Controller
MULTIAN IN
MULTICHANNEL
OUTPUT
DIG IN D8DISC
S-VIDEO
OUTPUT
DIGITAL
OUTPUT
S-VIDEO
OUT IN
The G68 Digital Surround Controller provides eight analogue
inputs, three of which can be used as a multichannel input from a
source with a suitable analogue multichannel output, such as an
SACD player.
Connect the ANALOGUE OUT sockets from the source to the
analogue multichannel inputs on the digital surround controller
using six phono leads.
Connect the S-video output from the SACD/DVD-A player to
video input S4 (AUX) on the G68, and configure the DISC source
to use this video input; see
Configuring sources
, page 30.
Optionally connect a digital output from the source to digital
input D8 (DISC) on the digital surround controller, using a digital
phono lead.
You can then select the source corresponding to the multichannel
input (AUX) for playing surround material, and the source
corresponding to the digital input (DISC) to decode other formats.
Note: Multichannel analogue sources may have subwoofer level
outputs that vary by up to 10dB, so it may be necessary to reduce
the LFE level to give correct bass integration; see
DSP presets
, page
43.
G Series DSP 9 31/10/03, 4:23:52 pm