Filter
Top Products
Installing the
digital surround
controller
16
To connect an active subwoofer (eg Meridian M1500 or M2500)
Subwoofer
PHONO LEAD
G68 Digital Surround Controller
SUB
CROSSOVER
INPUT
DIRECT
INPUT
•Connect the SUB analogue output socket from the G68 Digital
Surround Controller to the subwoofer’s line-level input using a
phono lead.
On the G68D use the RZ output (or RZ and LZ if you have two
subwoofers).
The digital surround controller provides a very high-quality
crossover for the subwoofer, and for best results you should use
this instead of the subwoofer’s crossover. To do this remove any
crossover in the subwoofer or set it to its highest setting (eg
200Hz). The subwoofer crossover can be set from the front panel of
the G68; see
Subwoofer crossover frequency
, page 40.
G Series DSP 16 31/10/03, 4:23:59 pm