Filter
Top Products
59
Replacing the Light-Source Lamp
■ Be sure that the power cord is unplugged from the wall outlet.
1 Remove the lamp-replacement opening
cover by loosening screws.
Loosen the two screws with a flat-end screwdriver.
Note
•The screws are fitted so that they do not come off the lamp-
replacement opening cover.
2 Loosen the screws, raise the handle,
and pull out the light-source lamp.
Loosen the two screws with a flat-end screwdriver.
Note
•The screws are fitted so that they do not come off the light-
source lamp.
(To be continued on the next page)
Screw
Lamp-replacemen
t
opening cover
Be careful not to damage
the claw.
Screw
Light-source lamp
Handle