Filter
Top Products
42
Menu Operations
Basic Menu Operation
When the MENU button is pressed, the projector enters Video or PC menu mode by responding to the input signal being
received.
Video menu mode:
Enters this mode when video-device-related signals are
input from the following devices.
• Video devices connected to the VIDEO IN (Y/C, VIDEO
and COMP) terminals.
PC menu mode:
Enters this mode when computer-related signals are input
from the following devices.
•A computer connected to the PC 1 terminal.
•A computer connected to the PC 2 terminal, which outputs
analog RGB, V, H/Cs signals.
•A computer connected to the DVI terminal.
1 Press the MENU button.
The main menu is displayed on the screen.
2 Press the cursor button 5 or ∞
∞∞
∞ to
select an item in the main menu.
3 Press the cursor button 3
33
3 or the
ENTER button to enter the submenu.
The submenu corresponding to the item selected in step
2 is displayed on the screen.
*When you selected “Information” in step 2, no
submenu is available.
4 Press the cursor button 5 or ∞
∞∞
∞ to
select an item in the submenu.
When a “Language” has been selected in step 2, press
to set the language.
5 Press the cursor button 2
22
2 or 3
33
3 to set
or adjust the value.
When an item which has the “ENTER” message has been
selected in step 4, press the ENTER button to move to the
next submenu.
• All reset → (Refer to page 49)
• Position → (Refer to page 51)
•Decoder → (Refer to page 45)
• Keystone → (Refer to page 54)
•Page 1 → (Refer to page 54)
•Page 2 → (Refer to page 54)
To exit the main menu:
•While the main menu is displayed, press the MENU button.
The main menu disappears and the original picture image
resumes.
To exit the submenu:
•While the submenu is displayed, press the EXIT button.
The menu returns to the previous menu.
• To exit the menu mode directly, press the MENU button.
The submenu disappears and the original video image is
restored.
MENU
MENU
Remote control unit
Projector
Remote control unit Projector
Remote control unit Projector
Remote control unit
Projector
Remote control unit Projector