Filter
Top Products
26
Connecting to Various Devices
Connecting to Devices which Control the Projector
Before connection, be sure to turn off both the projector and devices to be connected.
•Read thoroughly the manual that comes with each device to be connected.
• By connecting a computer to the RS-232C terminal, you can control the projector. Also, you can make an infrared remote
sensor extension unit and connect it to the REMOTE terminal of the projector.
*Obtain connection cables as required. Use a reverse connection cable.
*For details, refer to “RS-232C external control” on page 74.
* RS232 or IR control of the Video Processor is also required if controling the projector
Note
•When connecting the cable to the REMOTE terminal, refer to “How to attach the ferrite core” on page 29.
Y
P
B/B-Y
P
R/R-Y
IN
REMOTE
Y/C
VIDEO
R
G
B
H
IN OUT
V
• Desktop type
To RS-232C connector
To RS-232C connector
RS-232C reverse
connection cable
(separately available)
To RS-232C connector
• Note type
To REMOTE terminal
TO CONTROL
Infrared remote sensor
extension unit
(Needs to be made)
*By directly connecting the OUT terminal
to the second projector IN
terminal, a number of
units can be controlled by a single
computer.
*