Filter
Top Products
Uploading (adding) an image
Upload an image to the GSS 100 as follows:
1. Click the Add button. The Add Image field appears (see figure 30).
Figure 30. Uploading an Image
2. Click the Browse button. The Choose File to Upload window appears.
3. Browse through your system and select the desired image le.
NOTES: • The only valid le formats for uploaded image les are BMP and JPG.
• Valid le names are up to 240 alphanumeric characters with no spaces.
• Progressive JPG images are not supported.
• Bitmap (BMP) images must be formatted as 24-bit RGB.
• 1080i and 1080p les need to be mastered at a resolution of
1440 x 1080 instead of the expected 1920 x 1080.
4. Click the Open button. The complete file path and name appear in the Add Image field.
5. Click the Upload Image button. After several seconds, a thumbnail of the uploaded
image appears in the Image Index portion of the page and the image is available for
display.
Deleting a stored image
Delete a stored image from the GSS 100 as follows:
1. Select (click) the thumbnail of the image to be deleted.
2. Click the Delete button. A confirmation message appears.
3. Click the Ok button.
Selecting a stored image
Select a stored image for the GSS 100 to output as follows:
1. Select (click) the thumbnail of the image to be displayed. The file name and a larger
image appear in the Selected Image field.
2. Click the Take button. After several seconds, GSS outputs the image and shows the
name of the displayed image in the Current Image banner on this page.
GSS 100 Graphic Still Store • HTML Control and IPL File Manager 44