Filter
Top Products
Command/Response Table for SIS Commands (continued)
Command ASCII Command
(Host to Unit)
Response
(Unit to Host)
Additional description
Output rate
Set the output rate
X%
*
X^
= Rte
X%
*
X^]
Set the output resolution for the stored image to
X%
at
X^
Hz.
NOTE: The output rate (=) command affects the display of the stored images only; pass-through sources are output exactly as they are
input.
Example:
3*1=
Rte3•1
]
Set the output resolution for the stored image to
1024 x 768 at 60 Hz.
Read output rate
=
X%
*
X^]
The output resolution of the stored image is
X%
at
X^
Hz.
Output sync
Set the output sync format
6*
X&
# Syn
X&]
Set the output sync format of the stored image to
X&
.
NOTE: The output sync format (6#) command affects the display of the stored images only; pass-through sources are output exactly as
they are input.
Example:
6*0#
Syn0
]
Set the output sync format for the stored image to
RGBHV.
View output sync format
6#
X&]
The output sync format for the stored image is
X&
.
Set the output sync polarity
7*
X*
# Pol
X*]
Set the output sync polarity of the stored image to
X*
.
NOTE: The output sync polarity (7#) command affects the display of the stored images only; pass-through sources are output exactly as
they are input.
Example:
7*0#
Pol0
]
Set the output sync polarity for the stored image to
H– and V–.
View the output sync
polarity
7#
X*]
The output sync polarity for the stored image is
X*
.
RGB delay (for pass-through)
Set RGB delay
8*
X#
# Dly
X#]
Set the RGB delay value (video mute) before displaying
the RGB pass-through input to
X#
.
Read RGB delay
8#
X#]
Video mute
Mute video
1B
Vmt1
]
Mute the output video (black screen)
Unmute video
0B
Vmt0
]
Unmute the output video (output video)
Show video mute status
B
X@]
Front panel lock (Executive mode)
Partially lock front panel
1X
Exe1
]
Partially lock the front panel. Only the Image and Take
buttons function.
Completely lock front panel
2X
Exe2
]
Lock all front panel functions.
Unlock front panel
0X
Exe0
]
Unlock the front panel.
Show front panel lock status
X
X(]
NOTE: X@ = On / off status
0 = off 1 = on
X# = Time (duration)
00 – 50 (0.0 to 5.0 seconds) for RGB delay duration
X% = Resolution
0 = 640 x 480 5 = 1024 x 1024 10 = 1366 x 768 15 = 720p
1 = 600 x 600 6 = 1280 x 768 11 = 1365 x 1024 16 = 1080i
2 = 852 x 480 7 = 1280 x 1024 12 = 1400 x 1050 17 = 1080p
3 = 1024 x 768 8 = 1360 x 765 13 = 480p 18 = 1280 x 800
4= 1024 x 852 9 = 1365 x 768 14 = 576p 19 = 1440 x 900
X^ = Refresh rate
0 = 50 Hz 2 = 72 Hz 4 = 100 Hz
1 = 60 Hz 3 = 96 Hz 5 = 120 Hz
X& = Sync format
0 = RGBHV 1 = RGBS
X* = Sync polarity
0 = H– / V– 1 = H– / V+ 2 = H+ / V– 3 = H+ / V+
X( = Front panel lock modes
0 = unlock 1 = partial lock 2 = complete lock
GSS 100 Graphic Still Store • Programming Guide 23