Filter
Top Products
Effect submenu
Rotate the Adjust/Select knob while in the Effect submenu to cut (immediate switch) and
dissolve (the image dissolves from old to new). Cut is the default selection.
Duration submenu
Rotate the Adjust/Select knob while in the Duration submenu to select the duration for the
dissolve effect (if it is selected), between 0.0 and 5.0 seconds in 0.1 second increments. The
default duration is 1.0 seconds.
Output Configuration menu
Figure 12 is a flowchart that shows an overview of the Output Configuration menu and the
available settings.
10 sec. 10 sec.
Power
on
Menu
Default
Cycle
Next
Next
Next
Menu
Menu
Menu
Menu
Menu
10
sec.
10
sec.
Output
Config
Slide
Show
Advanced
Menu
Exit
Menu
10
sec.
10
sec.
10
sec.
1024 x
768 @60
Sync
RGBHV
Next
Output sync format
• RGBHV • RGBS
Resolution
See the table
on page 12.
Switch
Effect
10 sec. 10 sec.
Cut duration
0.0 to 5.0 seconds in
0.1 second increments.
Sync polarity
• H-/V- • H+/V-
• H-/V+ • H+/V+
Next
Menu Menu
Menu Menu
RGB Dly
0.0 Sec
H Pol V
Neg Neg
Figure 12. Output Configuration Submenu
NOTE: The Output Configuration menu settings apply only to the output of still images
stored in the GSS; the RGB Pass-through video is output exactly as it is input.
GSS 100 Graphic Still Store • Operation 11