Filter
Top Products
Magic 260
26
Section 21: Edit Scene (Continue)
(9) Press the same FUNCTION button that you pressed in step 3. Magic 260 will ask, “Do
you want to overwrite the old scene?”
(10) Press DATA wheel #3 to confirm “Yes” or DATA wheel #4 for “No”.
(11) Repeat steps 1- 10 to edit additional scenes.
Section 22: Edit Show
(1) Press the SHOW button so its green LED is ON solid.
(2) Turn DATA wheel #4 to select the relevant show page that contains the show you wish
to edit.
(3) Press the RECORD button so its green LED is flashing.
(4) Press the SHOW button so its green LED is flashing.
(5) Press the FUNCTION button that contains the show you want to edit. Magic 260 will ask
“Edit this existing Show?”
(6) Press DATA wheel #1 to confirm “Yes” and DATA wheel #2 for “No”.
(7) If you want to edit show step hold times, turn DATA wheel #1 to the relevant show step
or steps and turn DATA wheel #3 to change the hold time.
(8) If you want to edit the show name or Manual feature, turn DATA wheel #5 counter
clockwise until the show name screen appears in the display. Turn DATA wheel #1 to
change characters and turn DATA wheel #5 clockwise to move the cursor below the
next character (if needed, refer to Recording Shows section).
(9) Press the same FUNCTION button that you pressed in step 5. Magic 260 will ask, “Do
you want to overwrite the old show?”
(10) Press DATA wheel #1 to confirm “Yes” and DATA wheel #2 for “No”.
(11) Repeat steps 1-10 to edit additional shows.