Filter
Top Products
Magic 260
14
Section 11: Choose Fixtures (Continue)
(3) You will get a momentary 3 second warning in the LCD that reads as follows:
THIS FIXTURE DOES NOT MATCH
RECORD & PATCH MEMORY ?
Followed by:
DO YOU WISH TO CONTINUE?
YES NO
The reason for this message is the internal memory does not recognize the newly
selected fixture as being part of any Scenes or Shows currently stored in the console.
This warning appears each time a fixture is changed in the “Choose Fixtures” menu
option. You would only ever press DATA wheel #2, for NO, if you changed your fixture
setting accidentally. Selecting “NO” would cancel the change and your previously set
fixture would not change.
(4) Press DATA wheel #1 to select “YES”. DONE will momentarily appear in the display to confirm that the
newly selected fixture has been set.
(5) To choose your next fixture, turn DATA wheel #1, below “FIXTURE 01” clockwise, to access Fixture
#2. Your display should read as follows:
Fixture Type
02 NO FIXTURE
(6) Repeat steps 3, 4 & 5 to choose the remainder of your fixtures. When finished, press the “MENU”
button two times to exit. Magic 260’s display should return to the home screen.