Filter
Top Products
23
ENGLISH
3. DEVICE OPERATION
6. Fade in time (Fade In)
This feature allows you to adjust the length of time for the DN-C640’s Fade In feature
Set value
Processing
Fade in Fade in time
Off (default) Off ---
0.5sec – 10.0sec
(0.5second step)
On 0.5second – 10.0seconds
7. Fade out time (Fade Out)
This feature allows you to adjust the length of time for the DN-C640’s Fade Out feature.
Set value
Processing
Fade out Fade out time
Off (default) Off ---
0.5sec – 10.0sec
(0.5second step)
On 0.5second – 10.0seconds
8. Skip back time (Skip Back)
This feature allows you to set the amount of time that the DN-C640 will instantly replay when SKIP BACK is pressed on the
unit or IR control.
Set value
Processing
Skip Back time
1.0sec – 30.0sec (Default 10.0sec)
(0.5second step)
1.0second – 30.0seconds
9. End monitor time (End Monitor)
This feature allows you to set the amount of time at the end of the track that the DN-C640 will play when the END MON
button is pressed on the unit or IR control while in standby.
In the MP3 play mode, the time of monitor may not be correctly.
Set value
Processing
End Monitor time
5sec – 35sec (Default 10sec)
(5seconds step)
5seconds – 35seconds
10. End of message time (EndOfMessage)
This feature allows you to set the amount of time at the end of the track where the End of Message will be displayed. When
less then the user selected time is left at the end of the currently playing track, the time display will begin to flash until the
track has completed.
Set value
Processing
End of Message End of Message time
Off Off ---
0/ 5 /10 /15 /20 /30 /60sec
(Default 10sec)
On 0/ 5 /10 /15 /20 /30 /60seconds
11. Next track reserve (NextTrReserve)
This feature allows you to decide what the DN-C640 will do at the end of a track
Finish mode setting is “Stop”
Set value Processing at the end of track
On (default)
(Reserved a next track): Cue at the playback stating position of index 01 of reserved
track
(Not reserved a next track): Stop
Off Stop