Filter
Top Products
15
ENGLISH
3. DEVICE OPERATION
(3) Playing specific tracks in a specific
order (Program play)
With this function, you can choose any of the tracks on the
disc and program them to play in any order. Up to 99 tracks
can be programmed.
Creating the program
1. Press the PROGRAM button on the remote control unit.
• “PGM” indicator flashes, and “P0!” appears on the
display.
2. Press the ∞ or the § button on the remote control unit
to select the first track of the program.
3. Press the ENTER button on the remote control unit to
select the track.
• Skip to the next desired track and press the ENTER
button again.
• Repeat steps 2 and 3 to program the tracks in the
desired order.
4. Press the PROGRAM button to exit the program input
mode.
• “PGM” indicator lights, and the DN-C640 is ready to play
your program.
Editing the program
1. Press the RECALL button on the remote control unit
while the “PXX” is displayed...
2. Press the UP or the DOWN button on the remote control
unit to select the program number you want to edit.
3. Press the ∞ or the § button on the remote control unit
to select the track of the program number.
4. Press the CANCEL button on the remote control unit to
delete a track in the program.
5. Press the ENTER button on the remote control unit to
add a track.
• To enter the next track, press the ENTER button again.
• Repeat steps 2 and 3 to program the tracks in the
desired order.
6. Press the PROGRAM button to exit the program edit
mode.
• “PGM” indicator lights, and the DN-C640 is ready to play
your program.
Playing the programs
1. Press the PLAY/PAUSE button.
A-B PITCH
TEXT
SKIP BACK PLAY/PAUSECANCEL
PUSH
ENTER
- INDEX/DIR +
END MON
CUE
LOCK
DISPLAY
PITCH
• Program play starts.
Exit the program mode
1. Press the PROGRAM button.
• “PGM” indicator turns off.
• The program is also cleared when the EJECT button is
pressed.