Filter
Top Products
8
ENGLISH
1. GENERAL INFORMATION
@3
VOL+/– buttons
Press these to change the playback volume output
through the unbalanced VARIABLE Output jacks.
@4
ENTER button
Press this to confirm selections in the menus.
@5
PLAY/PAUSE button
Press this to start playback or pause playback.
@6
CUE button
Press this to return to the position at which playback
started or the next track.
@7
5 / 6 buttons
Press this to accurately change the positions where
playback will start or operate as FF or FR when held
down.
• Operational range
As shown in the figure below, the player can be operated
by the remote control unit in a range which of about 5
meters from the player’s remote sensor and over an angle
up to 30 degrees to the left and 30 degrees to the right of
the position directly in front.
5m
60°
• Loading batteries
Before using the supplied remote control unit for the first
time, load the batteries in the remote control unit. The
batteries provided are used to verify the operations of the
remote control unit only.
1. Take hold of the tab on the battery cover which is found
on the back side of the remote control unit, and pull it
up.
2. Load the two new size “AAA” batteries inside the battery
compartment while taking care to align their polarities
correctly with the polarity markings (
with and with
).
Size “AAA” (UU-4) batteries × 2
3. Push the battery cover down in the direction of the arrow
to close it.
CAUTION:
Misuse of the batteries can result in electrolyte leakage,
rupturing, corrosion, etc.
Bear in mind the following points when using batteries.
• Remove the batteries from the remote control unit if
the unit is not going to be used for a prolonged period (a
month or more).
• Do not use an old battery together with a new one.
• Insert the batteries while ensuring that their a and · poles
are properly aligned with the corresponding markings on
the remote control unit.
• Batteries with the same shape may have different
voltages. Do not use different types of batteries
together.
• If electrolyte has leaked, thoroughly wipe the inside
of the battery compartment, and then insert new
batteries.