Denon AVR-3803 Stereo System User Manual


 
68
12
LISTENING TO THE RADIO
If tuning does not stop at the desired station, use to the Manual
tuning operation.
1
Set the input function to TUNER.
FUNCTION
2
Watching the display, press the
BAND button to select the desired
band (AM or FM).
3
Press the MODE button to set the
auto tuning mode.
4
Press the TUNING UP or DOWN
button.
Auto tuning
Auto appears on the display.
Automatic searching begins, then
stops when a station is tuned in.
(Main unit) (Remote control unit)
Manual tuning
1
Set the input function to TUNER.
1
AMP
3
1
2
4
(Remote control unit)
(Remote control unit)
(Remote control unit)
Check that the remote control unit is set to AMP.
FUNCTION
2
Watching the display, press the
BAND button to select the desired
band (AM or FM).
3
Press the MODE button to set the
manual tuning mode.
Check that the displays AUTO
indicator turns off.
(Main unit) (Remote control unit)
(Remote control unit)
(Remote control unit)
4
Press the TUNING UP or DOWN button
to tune in the desired station.
The frequency changes continuously
when the button is held in.
(Remote control unit)
NOTES:
When in the auto tuning mode on the FM band, the STEREO
indicator lights on the display when a stereo broadcast is tuned in.
At open frequencies, the noise is muted and the TUNED and
STEREO indicators turn off.
When the manual tuning mode is set, FM stereo broadcasts are
received in monaural and the STEREO indicator turns off.