Denon AVR-3803 Stereo System User Manual


 
18
Before setting up the system
1
2
Check that all the connections are correct, then turn on the main units power.
Display the System Setup Menu.
Setting the type of speakers
The composition of the signals output to the different channels and the frequency response are adjusted automatically according to the
combination of speakers actually being used.
1
At the System Setup Menu select Speaker Configuration.
2
3
Switch to the speaker configuration screen.
Set whether or not speakers are
connected and, if so, their size
parameters.
To select the speaker
To select the parameter
4
Press the ENTER button to finalize the setting.
NOTE:
Select Large or Small not according to the actual size of the speaker but according to the speakers capacity for playing low frequency
(bass sound below frequency set for the Crossover Frequency mode and below) signals. If you do not know, try comparing the sound at both
settings (setting the volume to a level low enough so as not to damage the speakers) to determine the proper setting.
Center Sp.
Front Sp.
Subwoofer
Surround Sp. A
Surround back Sp.
Surround Sp. B