Denon AVR-3803 Stereo System User Manual


 
29
Setting the Ext. In Subwoofer Level
Set the method of playback of the analog input signal connected to the Ext.In Subwoofer.
1
At the System Setup Menu select Ext.In Subwoofer Level.
2
Switch to the Ext.In Subwoofer Level screen.
3
4
Enter the setting.
The System Setup Menu reappears.
Select the desired setting.
Select according to the specifications of the player being used. Also refer to the players operating instructions.
+15dB (default) recommended. (0, +5, 10 and +15 can be selected.)
Setting the Auto Surround Mode
The surround mode used at last for the four types of input signals shown below is stored in the memory, and the signal is automatically played
with that surround mode the next time it is input.
Note that the surround mode setting is also stored separately for the different input sources.
q Analog and PCM 2-channel signals
w 2-channel signals of Dolby Digital, DTS or other multi-channel format
e Multi-channel signals of Dolby Digital, DTS or other multi-channel format
r Multi-channel signal when conducting playback using the EXT.IN
During playback in the PURE DIRECT mode, the surround mode does not change even if the input signal is changed.
1
At the System Setup Menu select Auto Surround
Mode and press the ENTER button.