Denon AVR-3803 Stereo System User Manual


 
43
3
4
5
Use the and ª cursor buttons to display PRE on the
remote control unit, then press the ENTER button.
After SEL is displayed on the remote control units
display, the registered preset memory is displayed on the
remote control units display.
Use the and ª cursor buttons to
select the code to be reset.
When the mode you want to reset is shown on the remote
control units display, press the ENTER button to reset the
preset memory.
The LCDs back light flashes during the resetting operation,
and when the operation is completed, OK is displayed
and the set returns to the normal operating mode.
(2)Resetting learned buttons
DVD
2, 3, 4
11
2, 3, 4
1
2
Press the power ON/SOURCE button and the OFF button at
the same time.
•“PRE appears on the remote control units display.
Use the and ª cursor buttons to display RST on the
remote control units display, then press the ENTER button.
•“PRE is displayed.
3
Use the and ª cursor buttons to display LRN on the
remote control units display, then press the ENTER button.
•“SEL is displayed.
4
Use the and ª cursor buttons to select the mode of the
button to be reset, then press the ENTER button.
The LCDs back light flashes during the resetting operation,
and when the operation is completed, OK is displayed
and the set returns to the normal operating mode.