Denon AVR-3803 Stereo System User Manual


 
23
4
5
Select the mode.
Select Auto or Manual.
Auto:
Adjust the level while listening to the test tones produced
automatically from the different speakers.
Manual:
Select the speaker from which you want to produce the test tone to
adjust the level.
Select Surr. Sp., then select the surround speaker(s) from which you want to produce the test
tone (A, B or A+B).
Surr. Sp.: A
Adjusts the balance of the playback level between the channels when using surround speaker A.
Surr. Sp.: B
Adjusts the balance of the playback level between the channels when using surround speaker B.
Surr. Sp.: A+B
Adjusts the balance of the playback level between the channels when using surround speakers
A and B at the same time.
The Surr. Sp. can only be selected when both surround speakers A and B have been selected
at the System Setup Menu (when both A and B have been set to Large or Small).
Example: When the Auto mode is selected
6
7
8
Select Test Tone Start.
Select Ye s.
a. If the Auto mode is selected:
Test tones are automatically emitted from the different speakers.
The test tones are emitted from the different speakers in the
following order, at 4-second intervals the first time and second time
around, 2-second intervals the third time around and on:
Use the CURSOR left and right buttons to adjust all the speakers to the
same volume.
The volume can be adjusted between 12 dB and +12 dB in units of
1 dB.
b. When the Manual mode is selected
Use the CURSOR up and down to select
the speaker for which you want to output
test tones, then use the CURSOR left and
right to adjust so that the volume of the
test tones from the various speakers is
the same.
Example: When the volume is set to 11.5 dB
while the test tone is being
produced from the Front Lch
speaker
Example: When the volume is set to 11.5 dB
while the Front Lch speaker is
selected
Flashing
Flashing
FL C FR SR SBR SBL SL SW
SB
1spkr
2spkrs
When the surround back speaker setting is set to 1spkr for
Speaker Configuration, this is set to SB.