Filter
Top Products
59
Specifications
All specifications are accurate at the time of printing. Classé reserves the right to
make improvements without notice.
■ Frequency response DC – 200kHz ± 0.1dB
■ Distortion (THD + noise) 0.003%
■ Maximum input voltage (single-ended) 5Vrms
■ Maximum input voltage (balanced) 10Vrms
■ Maximum output voltage (single-ended) 10Vrms
■ Maximum output voltage (balanced) 20Vrms
■ Gain range -100dB to +14dB
■ Input Impedance 100kΩ
■ Output Impedance (main output) 100Ω
■ Signal-to-noise ratio (ref. 10Vrms input) 100dB
■ Channel separation better than 100dB
■ Crosstalk (any input to any output) better than -120dB @ 1kHz
■ Rated power consumption 30W
■ Idle power consumption 29W
■ Mains voltage determined by the needs of country for which
the unit was manufactured; cannot be reset by dealer or user
■ Overall dimensions Width: 17.5” (445mm)
Depth: 16.5” (419mm)
Height: 6.75” (121mm)
■ Net weight 45 lbs (21 kg)
■ Shipping weight 54 lbs (25 kg)
For more information, see your Classé dealer, or contact:
Classé Audio
5070 François Cusson
Lachine, Quebec
Canada H8T 1B3
Telephone +1 (514) 636-6384
FAX +1 (514) 636-1428
Internet: http://www.classeaudio.com
email: cservice@classeaudio.com
Classé and the Classé logo are trademarks of Classé Audio Inc. of Lachine, Canada. All rights reserved.
i-Command
™
is a trademark of Equity International, Inc. All rights reserved.
AMX
®
is a registered trademark of AMX Corporation of Richardson, TX. All rights reserved.
Crestron
™
is a trademark of Crestron Electronics, Inc. of Rockleigh, NJ. All rights reserved.
Dolby, Pro Logic, Surround EX and the double-D symbol are trademarks of Dolby Laboratories.
DTS and Neo:6 are trademarks of Digital Theater Systems, Inc.