Filter
Top Products
28
14 DC Trigger Outputs
Many audio/video components can supply a DC control voltage to
associated equipment in order to induce desired behavior.
Two
1
/8th-inch mono mini-jacks provide individually controllable DC
trigger outputs which can be used for any of a number of purposes, as
described in The Menu System. For example, your dealer can program
Trigger Out1 to toggle your Classé power amplifier between operate
and
standby with your SSP-600.
The trigger outputs will create a 12Vdc signal that can support up to
100mA of current.
15 Microphone Input
The MIC input on the rear of the SSP-600 is used during auto-calibration
of the system.
For a quick setup, connect the supplied microphone to this input and
follow the procedure outlined in the Initial Setup
section of this manual.
For more details, please refer to The Menu System
, later in this manual.
16 Analog Audio Inputs
These RCA jacks accept right-channel and left-channel (single-ended)
inputs from line-level source equipment such as tuners, CD players,
and tape decks. Any of these inputs may be selected by touching the
corresponding button on the main operational screen of the front panel
touchscreen.
To achieve the best possible results, we suggest that you use only high-
quality shielded interconnect cables. Please consult with your local Classé
dealer for advice on the best cables for use in your system.
17 Analog Audio Outputs (stereo)
Four pairs of stereo analog outputs are provided on the SSP-600.
REC1, REC2 and REC3 support various recording devices (both the
audio portion of an A/V recorder such as a VCR or a DVR, as well as
audio-only recorders such as CD-R burners).
The ZONE output supplies an independently selectable audio signal to a
remote zone within your home, regardless of what is being listened to in the
main system. If you find this idea interesting, we suggest you speak with your
authorized Classé dealer about multi-zone system designs for your home.