Filter
Top Products
30
Note that the three analog video standards offer varying degrees of
performance:
• Component video offers the highest picture quality
• S-Video is second-highest in picture quality
• Composite video offers the lowest picture quality
For this reason, you are advised to use component video connections
whenever possible, and S-video connections when component is not
available. Composite video connections should be used when the other
options are not available, or on less critical sources (e.g., a VHS video
cassette recorder, or perhaps a video game).
The Component OUTPUT makes the selected video signal available to
your main display in a Component video format, regardless of the format
in which it was received by the SSP-600. This includes both standard
definition and high definition video signals.
For your convenience, all standard definition Component video signals are
converted to S-video and composite video for display via this output.
BYPASS MODE: In order to preserve the highest-possible signal integrity
on the Component video path, no On Screen Display is available.
21 AC Mains Power Switch
The main power switch for the SSP-600 is adjacent to the receptacle for
the power cord.
Switching the unit on puts it in standby mode. The surround processor
should be in standby before being switched off.
Danger! Potentially dangerous voltages and current capabilities exist
within your surround processor, even when disconnected
from AC mains. Do not attempt to open any portion of the
surround processor’s cabinet. There are no user-serviceable
parts inside your surround processor. All service of this
product must be referred to a qualified authorized Classé
dealer or distributor.
22 AC Mains Input
An IEC standard power cord (supplied) is used with the SSP-600. Plug the
cord into the IEC receptacle provided, and the other end into a suitable
wall outlet.