Filter
Top Products
VRX633R 39
English
Owner’s manual
NAVI functions
When Clarion Navigation (hereinafter referred to
as NAVI) is connected, the following functions
are enabled:
• Showing the NAVI display;
• NAVI operation using the unit key;
• NAVI guidance sound interruption;
• Remote operation of navigation functions by the
remote controller through the optic sensor.
∗ While interrupting the NAVI audio signal, an audio
sound level is decreased and the NAVI guidance
sound output is mixed.
∗ NAVI guidance sound interruption is possible even
when the panel is closed, however in this case,
only the Audio Display is showed.
Setting Clarion NAVI as external
input equipment
Be sure to perform this setting after connecting
Clarion NAVI.
1. When the panel is open, press the ADJ but-
ton £ to show the adjustment selection dis-
play.
2. Operate the JOYSTICK § upward or down-
ward to select “INPUT”. A menu bar is shown
to the right to select the following items:
● “NAVI”: Setting when Clarion NAVI is con-
nected;
● “CCD”: Setting when Clarion CCD cam-
era is connected to this unit;
● “RGB”: Setting when a RGB image of other
company’s equipment is input;
● “COM”: Setting when a composite image
of other company’s equipment is input.
∗ These settings cannot be selected when the
DVD changer is connected.
3. Operate the JOYSTICK § rightward or left-
ward to select “NAVI”. Press ENT at the cen-
ter of the JOYSTICK § to set connection of
Clarion NAVI.
NAVI operation
Changeover between NAVI display and Audio/
Visual (hereinafter referred to as AV) displays.
When the panel is open, the NVG/AV button !
has the same function as the NVG/AV button !
on the NAVI remote controller to set a screen
mode and a NAVI interruption.
Operate this button to change over between NAVI
and AV displays.
∗ When the NAVI Display/NAVI guidance sound in-
NAVI Operations
terruption setting (NAVI operation) is turned to the
NAVI/NAVI mode on this unit, the audio sound level
is decreased.
When the NAVI display is shown with the panel
open, the following buttons are assigned to NAVI
control functions, which correspond to the same
functions as that of the same buttons on the NAVI
remote controller.
JOYSTICK §
MENU button ∞
VIEW button ¢
IN button £
OUT button ™
SHORT button &
RTN button *
RPT/RPT+ button (
ROUTE button )
ICON button ¡
Note:
• These buttons become normal audio operating but-
tons when changing into the AV display using the
NVG/AV button
!
.