Filter
Top Products
32 VRX633R
English
Owner’s manual
∗ Press and hold one of the PRESET buttons #
for 2 seconds or longer to store the current sta-
tion into the preset memory.
Manual memory
1. Select the desired station with seek tuning,
manual tuning or preset tuning.
2. Press and hold one of the PRESET buttons
# for 2 seconds or longer to store the cur-
rent station to that preset memory.
Auto store
Auto store selects 6 TV stations automatically and
stores each one into a preset memory.
If there are not 6 stations with good reception,
stations previously stored in memory remain and
only the strong stations are stored into memory.
1. Press the BND button % and select the de-
sired TV band. (TV1 or TV2)
2. Press and hold the AS/PS button 5 for 2 sec-
onds or longer. The stations with good recep-
tion are automatically stored to the PRESET
buttons # .
Preset scan
Preset scan allows the user to view each preset
position before it automatically advances to the
next preset. This function is useful for searching
for desired TV station in memory.
1. Press the AS/PS button 5.
2. When the desired channel is received, press
the AS/PS button 5 again.
Switching the VTR system between
NTSC and PAL
∗ This function is enabled only when the panel is
open.
Switch to the VTR or DVD changer mode you
use.
1. Press the ADJ button £ to switch to the ad-
justment selection display.
2. Operate the JOYSTICK § upward or down-
ward to move the cursor to “VTR N/P”.
3. Operate the JOYSTICK § rightward or left-
ward to move the cursor to select “NTSC” or
“PAL”.
4.
Press the ENT at the center of the JOYSTICK
§ to set the selected VTR or DVD changer
mode.
Seek tuning
1. Press the BND button % and select the de-
sired TV band (TV1 or TV2).
∗ If “MANU” is lit in the display (or when the panel
is closed, if the indicator “SRCH” is not lit), press
and hold the BND button % for 1 second or
longer. “MANU” in the display goes off (or when
the panel is closed, the indicator “SRCH” lights)
and seek tuning is now available.
2. Press the right or left side of the SEARCH
button 2 to automatically seek a station.
Press the right side of the SEARCH button
2 to automatically tune up the frequency band
to the next available TV station; press the left
side to automatically tune down.
Manual tuning
There are 2 ways available: Quick tuning and step
tuning. When you are in the step tuning mode,
the frequency changes one step at a time. In quick
tuning mode, you can quickly tune the desired
frequency.
1. Press the BND button % and select the de-
sired band. (TV1 or TV2)
∗ If “MANU” is not lit in the display (or when the
panel is closed, if the indicator “SRCH” is lit),
press and hold the BND button % for 1 sec-
ond or longer. “MANU” appears in the display
(or when the panel is closed, the indicator
“SRCH” goes off) and manual tuning is now
available.
2. Tune into a station.
● Quick tuning:
Press and hold the right or left side of the
SEARCH button 2 for 1 second or longer to tune
in a station.
● Step tuning:
Press the right or left side of the SEARCH but-
ton 2 to manually tune in a station.
Note:
• Manual tuning is cancelled if you do not operate
the unit for 7 seconds longer.
Recalling a preset station
A total of 12 TV stations can be stored (6-TV1
and 6-TV2). This allows you to select your favor-
ite TV stations and store them in memory for later
recall.
1. Press the BND button % and select the de-
sired TV band. (TV1 or TV2)
2. To recall a stored TV station, press the de-
sired PRESET button # to select that sta-
tion.
TV Operations